EFM Emerson ROC provides a configuration section to the Ignition Gateway that can be seen in the Configure section of the Ignition Gateway web UI. There is one configuration page - EFM Emerson ROC → Settings.  The page contains two tabs: TLP Definitions and EFM Mappings.

Support Files

The Cirrus Link default TLP Definitions and EFM Mapping files can be used as a starting point for configuring the EFM Emerson ROC module.

Download Here

(Note these need to be thoroughly tested and reviewed in your application before they are put into production)

Zip file contents:

• TLP Definitions
  • FB107-TLPs-V1_0.csv
  • ROC800-TLPs-V1_0.csv
  • UserProgram-TLPs-V1_0.csv
• EFM Mappings
  • Configuration Mappings
    • FB107-Meter_Configuration_Mapping-V1_0.csv
    • ROC800-Meter_Configuration_Mapping-V1_0.csv
  • Periodic Mappings
    • FB107-Orifice_Turbine_Meter_Periodic_History_Mapping-V1_0.csv
    • ROC800-Orifice_Turbine_Meter_Periodic_History_Mapping-V1_0.csv

TLP Definitions

The first tab contains settings for creating sets of TLP Definitions:

New TLP Definitions can be created by following the 'Create new TLP Definition' link as shown below:

Main Properties

• Name

  • This is the friendly name of the TLP Definition being created

• CSV File

  • Click the 'Browse' button to select CSV file for this TLP Definition