Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
Page History
...
- Ignition with Google Cloud Injector Module installed
- Review the Cirrus Link Module Installation documentation for installation details.
- Ignition Designer installed
- Review the Inductive Automation documentation for Launching Designer against the Ignition gateway
- An existing AWS account with an active Kinesis Stream and/or DynamoDB Database.
- Documentation on creating a Kinesis Stream can be found here.
- If using a Firehose stream, its source must be "Direct PUT or other sources"
- Documentation on creating a DynamoDB Database table can be found here.
- DynamoDB Database tables ideally should be created with the following settings:
Primary partition key: UUID (String)
Primary sort key: GROUP_EDGE_ID (String)
- DynamoDB Database tables ideally should be created with the following settings:
- Documentation on creating a Kinesis Stream can be found here.
...
| Tip |
|---|
| Refer to the Ignition Tag Browser and Creating Tags documentation for assistance in configuring Ignition tags |
...
Make sure that the Ignition Designer has read/write communications turned on by selecting the Project/Comm Read/Write button highlighted in the image below. 
| Tip |
|---|
| Review the Inductive Automation Designer documentation for additional assistance on setting the project communication mode |
...
Overview
Content Tools