Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
Page History
...
At this point, Ignition is running as a Docker container in Azure Edge. You should be able to browse to http://[ip_address_of_azure_edge]:8088. Replace [ip_address_of_azure_edge] with the IP address of your Azure Edge system. You should see something similar to the following.
Follow the steps in the Installing and Upgrading Ignition documentation starting from Step 3 in the document. Select and select either Ignition or Ignition Edge for this tutorial.
...
Once the system is showing connected, tags can be created in Ignition Designer. Review the Inductive Automation documentation for Launching Designer against the Ignition gateway
...
| Tip |
|---|
| Refer to the Ignition Tag Browser and Creating Tags documentation for assistance in configuring Ignition tags |
...
Make sure that the Ignition Designer has read/write communications turned on by selecting the Project/Comm Read/Write button highlighted in the image below.
| Tip |
|---|
| Review the Inductive Automation Designer documentation for additional assistance on setting the project communication mode |
...
Overview
Content Tools