You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

termining the settings for the MQTT Transmission History Store requires understanding the unique system properties at each Edge Node.

These include the number of tags at the Edge Node and Device levels, the frequency at which these tags are changing, the required period for data storage and the RAM or disk based storage available on the Edge hardware.

Testing is the best way to determine your settings for your Edge Gateway(s) and the recommended approach is to:

  • Configure a History Store with large Edge Node Tag Capacity and Device Tag Capacity
  • Disconnect for a set time period
  • Monitor the live updates for the count of tag change events and memory used from the Transmission Info History Store metrics
  • Reconnect and monitor the data flushing to ensure that the Flush settings (quantity and period) are able to handle the current tag changes that continue to build. Whilst the history flush is in progress, all new change events are written to the history store until it has been completely flushed. If the tag change rate at the Edge is faster than the MQTT Transmission Flush Period this can cause a build up of data in history store(s) and prevent the publishing of live data.
  • Extrapolate based on the test  


For ease of control we recommend setting a Primary Host ID in both MQTT Engine and in the MQTT Transmission.

Removing the Primary Host ID from MQTT Engine will simulate the primary backend application going offline and cause MQTT Transmission to store data to the History Store.

Restoring the Primary Host ID to MQTT Engine will simulate that the primary backend application is online and cause MQTT Transmission to flush the stored data.


Example





Additional Resources

And restoring the Primary Host ID, we can see the metrics reduce as the data is flushed

  • No labels

New to MQTT? Start Here!