Page History

...

• Enable auto-discovery
  • Enables ABB Totalflow driver to run application auto-discovery at startup and re-configuration.
• Add All Array-Register Definitions
  • Automatically add all the Array-Register definitions configured within the ABB Totoalflow driver module.
• Auto-Generate Templates and Poll Groups
  • Automatically generates default Array-Register templates and default poll group on startup and reconfiguration. Note that the driver will create a default Array-Register template will be generated for specific application type (enumeration ) if polling the following criteria are met
    • Polling is enabled
    (see
    • in the 'Totalflow Applications Panel'
    below)
    • for at least one of applications of this type.
    Another requirement for the default Array-Register template to be generated is that there
    • There should not be no
    any
    • custom template(s) for this application type.    

DB2 Protocol

• Station ID
  • Station ID of this ABB Totalflow device.
• Keep Alive
  • Time interval (in seconds) between 'keep-alive' polls that may be required to maintain PERSISTENT connection if ABB Totalflow device is configured to disconnect on inactivity. To disable 'keep-alive' polls, set to 0. 
• Host Timeout
  • Timeout (in milliseconds) to wait for a reply from the host. The default value is 3000 milliseconds.
• Poll EOT Timeout
  • Time (in milliseconds) to wait to ensure there are no more packets to receive. The default value is 700 milliseconds.
• Auto-Discovery EOT timeout
  • Time (in milliseconds) to wait to ensure there are no more packets to receive during auto-discovery. The default value is 2000 milliseconds. 
• Number Retries
  • Number of retries if DB2 request is NAKed.
• Supervisory Frames
  • Number of DB2 supervisory frames.
• Password
  • DB2 Protocol Security Code. If device is set with default security code of 0000, leave blank.

...

• Review default Array-Register Templates generated based on provided Array-Register definitions per each Totalflow application enumeration obtained during auto-discovery. Note that default Array-Register Template entry will be generated for application enumeration only if at lease one of installed application of this type is enabled. Default Array-Register templates can be modified by either editing or by importing an Array-Regsiter template CSV file.

...