Page History

...

Station ID
- Station ID of this ABB Totalflow device
Keep Alive
- Time interval (in seconds) between 'keep-alive' polls that may be required to maintain PERSISTENT connection if ABB Totalflow device is configured to disconnect on inactivity. To disable 'keep-alive' polls, set to 0.
Host Timeout
- Timeout (in milliseconds) to wait for a reply from the host. The default value is 3000 milliseconds.
Poll EOT Timeout
- Time (in milliseconds) to wait to ensure there are no more packets to receive. The default value is 700 milliseconds.
Auto-Discovery EOT timeout
- Time (in milliseconds) to wait to ensure there are no more packets to receive during auto-discovery. The default value is 2000 milliseconds.
Number Retries
- Number of retries if DB2 request is NAKed.
Supervisory Frames
- Number of DB2 supervisory frames.
Password
- DB2 Protocol Security Code. If device is set with default security code of 0000, leave blank.
Add All Array-Register Definitions
- Automatically add all the Array-Register definitions configured within the ABB Totoalflow driver module.

RBAC Enabled
- A flag indicating that Enables Role-Based Access Control (RBAC) is enabled on the device and therefore the X_RBAC frame needs to be included in the DB2 request message.
Operator ID
- Operator ID. If RBAC is not enabled on the device, leave blank.
Password
- Operator password. If RBAC is enabled on the device, leave blank.

Versions Compared