Page History

...

Anchor
ServerSettingsMain ServerSettingsMain

Server Settings - MainImage Added

Image Removed

• Name
  • This is the friendly name of the MQTT Server used to easily identify it.
• Enabled
  • Whether or not connections to this MQTT Server are enabled.
• URL
  • This is the URL of the MQTT server.  Its format is as follows: [protocol]://[location]:[port].  Each of these are shown below.
    • protocol - Either tcp or ssl
    • location - The server location.  e.g. localhost, myserver.chariot.io, mydomain.com, etc
    • port - The port the MQTT Server is listening on.  Generally this is 1883 if using TCP or 8883 if using SSL
• Username
  • Optional MQTT username to use in the MQTT connect packet.  This is required if the MQTT Server to connect to requires it.
• Password
  • Optional MQTT password to use in the MQTT connect packet.  This is required if the MQTT Server to connect to requires it.

Anchor
ServerSettingsTLS ServerSettingsTLS

Server Settings - TLS

...

Tip
See this document for TLS configuration: Secure MQTT Communications using SSL or TLS

...