Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
...
Once the configuration steps have been completed, the resulting network topology is shown below:
Now that the MGate unit is setup and providing a Modbus TCP to Modbus RTU RS-485 multi-drop serial network, we’ll proceed to setting up the Modbus TCP driver in Ignition to take advantage of this network.
Note |
---|
It might not be completely evident when setting up a network like this that we will only setup a single Modbus TCP Device Connection to talk to all three (3) of the Modbus RTU slave devices connected to the MGate. |
In Ignition go the Config/OPC UA/Device Connections and select the “Modbus TCP” driver from the list of protocols: