Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
...
The image below shows an example of how Modbus RTU Devices could would be connected to through the Moxa gateway.
The gateway uses male DB9 serial ports to connect to the Modbus RTU or ASCII devices.
Each port supports three serial interfaces: RS-232, RS-422 and RS-485 (both 2 and 4 wire) with the pinout shown below:
Moxa provide a Windows based utility that can be used to connect to the MGate and aid in configuring the unit. But the MGate also provides a native web UI that provides the same functionality from any operating system. Out of the box the MGate will have the following default TCP/IP address and default Account and Passwords:
Temporarily set your computer’s Ethernet domain to the 192.168.127.xxx domain. Once you have done that you should be able to open a web browser and then browse to http://192.168.127.254. That should result in the following web page to appear:
After you enter the default admin/moxa credentials you will be prompted to enter a new password.
Note |
---|
This is the password that you will need to record and keep for future access to the MGate unit. |
...