Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
EFM Emerson ROC provides a configuration section to the Ignition Gateway and this can be seen in the left side menu bar of the Ignition Gateway web UI. Once configured, a device connection must be created, TLP definitions specified and TLP templates and poll groups must be created
Warning |
---|
Please review the EFM Emerson ROC Quickstart for all configuration steps required to pull data available from a ROC into Ignition. |
The configuration options for each of the two tabs - TLP Definitions and EFM Mappings are detailed below.
Tip |
---|
The Cirrus Link default TLP Definitions and EFM Mapping files can be used as a starting point for configuring the EFM Emerson ROC module. (Note these need to be thoroughly tested and reviewed in your application before they are put into production) Zip file contents:
|
Anchor | ||||
---|---|---|---|---|
|
Tip |
---|
Review our ERD: TLP Definitions and EFM Mapping CSV formats for more details on the content of these configuration mapping files. |
The first tab contains settings for creating sets of TLP Definitions:. Each Emerson ROC device connection will use a subset of these global TLP definitions to operate.
New TLP Definitions can be created by following the 'Create new TLP Definition' link as shown below:
...
Name
This is the friendly name of the TLP Definition being created
CSV File
Click the 'Browse' button to select CSV file for this TLP Definition. TLPs can be device specific or associated with a specific user program
Note |
---|
If creating custom TLP Definitions files, each T and P parameter should be included only once. Any logic group (L parameter) is configured as part of the Emerson ROC Device Connection here |
Anchor | ||||
---|---|---|---|---|
|
The EFM Mappings are used for publishing EFM Records representing Events, Alarms, Configuration, and History entries that are polled from a device.
There are two tabs Configuration Mappings and Periodic Mappings
Anchor | ||||
---|---|---|---|---|
|
The configuration mapping files are used for building up EFM Configuration Records. They define which TLPs map to which fields (columns) in an EFM Configuration Record. Additionally they can provide bit and/or value mappings for the TLP values.
Tip |
---|
Review our EFM Emerson ROC Quickstart guideERD: TLP Definitions and EFM Mapping CSV formats for more details on the content of these configuration mapping files. |
The Configuration Mappings tab shows all uploaded Configuration Mapping files.
...
The periodic mapping files are used for building up EFM Periodic History Records. They define which TLPs map to which fields (columns) in an EFM Periodic History Record, the logical type of the point type table (meter, station, or input), and an archive type of the value.
Tip |
---|
Review the EFM Emerson ROC Quickstartour ERD: TLP Definitions and EFM Mapping CSV formats for more details on the content of these periodicconfiguration mapping files. |
The Periodic Mappings tab shows all uploaded Periodic Mapping files.
...
Name
This is the friendly name of the Periodic Mapping being created
CSV File
Click the 'Browse' button to select CSV file for this Periodic Mapping
To finish configuring Emerson ROC device, the following three things (as detailed in EFM Emerson ROC Quickstart document) need to be done:
When this is done, the 'Devices' configuration page will show the 'Status' of each device set to 'Connected'.