EFM Emerson ROC provides ROC provides a configuration section to the Ignition Gateway that and this can be seen in the Configure section left side menu bar of the Ignition Gateway web UI. There is one configuration page - EFM Emerson ROC → Settings.  The page contains two tabs:  

Once configured, a device connection must be created and TLP definitions, templates and poll groups must be created. 

Image Added

The configuration options for each of the two tabs - TLP Definitions and EFM Mappings are detailed below. 

...

Anchor
TLPDefinitions TLPDefinitions

TLP Definitions

The first tab contains settings for creating sets of TLP Definitions:

...

• Name

  • This is the friendly name of the TLP Definition being created

• CSV File

  • Click the 'Browse' button to select CSV file for this TLP Definition

Anchor
EFMMappings EFMMappings

EFM Mappings

The EFM Mappings are used for publishing EFM Records representing Events, Alarms, Configuration, and History entries that are polled from a device.

Anchor
ConfigurationMapping ConfigurationMapping

Configuration Mappings

The configuration mapping files are used for building up EFM Configuration Records.  They define which TLPs map to which fields (columns) in an EFM Configuration Record.  Additionally they can provide bit and/or value mappings for the TLP values.  Click here for

The Configuration Mappings tab shows all uploaded Configuration Mapping files.

...

• Name

  • This is the friendly name of the Configuration Mapping being created

• CSV File

  • Click the 'Browse' button to select CSV file for this Configuration Mapping

Anchor
PeriodicMapping PeriodicMapping

Periodic Mappings

The periodic mapping files are used for building up EFM Periodic History Records.  They define which TLPs map to which fields (columns) in an EFM Periodic History Record, the logical type of the point type table (meter, station, or input), and an archive type of the value.Click here for

The Periodic Mappings tab shows all uploaded Periodic Mapping files.

...

• Name

  • This is the friendly name of the Periodic Mapping being created

• CSV File

  • Click the 'Browse' button to select CSV file for this Periodic Mapping

Anchor
DeviceConnection DeviceConnection

Emerson ROC Device Connection

Device connection for Emerson ROC module can be configured via OPC UA configuration.  Begin by selecting OPC UA → Device Connections on the left as shown below:

Image RemovedImage Added

This opens respective configuration page as shown below:

...

This opens the 'New Device' configuration mage for EFM Emerson ROC Device:

Image Removed

...

. The configuration sections available are General, Connectivity, Security, Date/Time, Records, Records Signature, Sparkplug and Advanced Settings.

Anchor
General General

General

Image Added

• Name
  • Device name
• Description
  
  • Device description
• EnabledDevice enabled
  • Checkbox to enable/disable device. Selected by default

Anchor
Connectivity Connectivity

Connectivity

Image Added

• Protocol Type
  • Specific Protocol Type of the device
    
    • Options are ROC ROCand ROC_PLUS
• Hostname
  • Hostname or IP address of the device
• TCP Port
  • TCP Port of the device
• Socket Timeout
  • TCP socket operation timeout in seconds. A timeout of zero is interpreted as an infinite timeout. To use the system default, set to -1. Default is 10 seconds.
• ROC Unit Code
  • Station Address Unit Code of the ROC unit
• ROC Group Code
  • Station Address Group Code of the ROC unit
• Host Unit Code
  • Station Address Unit Code of the host (this driver)
• Host Group Code
  • Station Address Group Code of the host (this driver)
• Periodic Mapping
  
  • Select a Periodic History Mapping (see above) if History polling will be enabled
• Configuration Mapping
  • Select a Configuration Mapping (see above) if any Configuration, Event, or History polling will be enabled
• Add All TLP Definitions
  • Checkbox to add all configured TLP definitions. De-selected by default
  • If selected, all TLP definitions configured within the module (see above) will be automatically added to this Device configuration.  This is a convenient way to easily add TLP definitions to a Device without having to manually add them after the Device has been initially configured.  If the module contains one or more TLP definitions that are not compatible with the device being configured, leave this option disabled and configure the TLP Definitions manually after the device has been configured. 

Anchor
Security Security

Security

Image Added

• Security Enabled
  • Whether Checkbox to enabled security is enabled on the ROC device. De-selected by default
• Operator ID
  • A three character operator ID. Default is "Lol"
• Password
  • A four digit password
• Access Level Enabled
  • Whether of not the Checkbox to enable Access Level is enabled for the above operator for Operator ID on the ROC device. De-selected by default
• Access Level
  • The Access Level to use (0-5) if enabled. Default is 0

Anchor
Date/Time Date/Time

Date/Time

Image Added

• Date Time Offset
  • The date time offset of the ROC clock from the Ignition system running this driver in seconds. Default is 0
• Sync ROC RTC

  • Whether or not Checkbox to synchronize the RTC clock with local time from the Ignition system. De-selected by default

• Sync Expression

  • The Quartz Cron expression to use to schedule the synchronization of the ROC RTC (default: . Default is "0 0 0 * * ?")

Anchor
Records Records

Records

Image Added

• Alarm Scan Rate
  • The rate in seconds that alarm records are scannedSet . Set to -1 to disable alarm scanning (default). Default is -1
• Event Scan Rate
  • The rate in seconds that event records are scannedSet . Set to -1 to disable event scanning (default). Default is -1
• Minute History Scan Rate
  • The rate in seconds that minute history records are scannedSet . Set to -1 to disable minute history scanning (default). Default is -1
• Periodic History Scan Rate
  • The rate in seconds that periodic history records are scannedSet . Set to -1 to disable periodic history scanning (default). Default is -1
• Daily History Scan Rate
  • The rate in seconds that daily history records are scannedSet . Set to -1 to disable daily history scanning (default)

...

• • . Default is -1

Anchor
RecordsSignature RecordsSignature

Records Signature

Image Added

• Enable Signature
  • Checkbox to enable a digital signature on all Records. De-selected by default
• Algorithm
  • The hashing algorithm to use when generating the digital signature
  • Options SHA_1,SHA_224, SHA_256, SHA_384 and SHA_512
• Change Password?
  • Checkbox to allow new password generation. De-selected by default
• Password
  • Password used to generate the PBE secret key for encrypting the digital signature

Anchor
Sparkplug Sparkplug

Sparkplug

Image Added

• Group ID
  • An ID representing a logical grouping of Edge Nodes and Devices
• Edge Node ID
  • An ID representing an Edge or Network (EoN) Node
• Device ID
  • An ID representing a Device

Anchor
Advanced Advanced

Advanced

Image Added

• Serial Number
  • The serial number to include in Records for uniqueness. Can be manually configured (example: '0001234556') or a TLP can be specified to be read from the device (example: '[15,0,14]').
• History Time Stamp
  • Checkbox to enable history time stamp. Selected by default.
  • If enabled the history time stamp will be at the beginning of the period (leading), otherwise at the end of the period (trailing)
• Read Delay
  • The Polling Read Delay in milliseconds when polling response may be slow (recommend when using a terminal server). Default is 0 milliseconds
• Poller Watchdog Rate
  • The rate in seconds that the poller watchdog thread is executed to verify polling threads are running. Set to 0 to disable the poller watchdog. Default is 0 seconds.

When all EFM Emerson ROC devices are configured, the Devices page will look as shown below:

...