MQTT Modules

Cirrus Link's MQTT Modules can be downloaded here:

https://inductiveautomation.com/downloads/ignition

The MQTT Modules are built to work with specific versions of Ignition.  The following table shows which MQTT Module versions work with which versions of Ignition.

Inductive has a short video showing how to install modules into Ignition.  You can watch the video or read on to learn how:

https://inductiveuniversity.com/video/installing-or-upgrading-a-module

To install, browse to your Ignition Gateway's web UI and select 'Configure'.  The default URL is:

http://127.0.0.1:8088

The default username / password when clicking 'Configure' is admin / password.  Once in the Configuration menu select 'Modules' under 'Configuration' on the left navigation bar.

Once in the modules page, scroll to the bottom of the page and click 'Install or Upgrade a Module'

Once in the Install or Upgrade a module page, click the 'Choose File' button and browse to the MQTT Module to install.  Then click the Install button:

After clicking the Install button your will be asked to accept the license agreement.  If you accept, click the 'I accept' tick box and then click the 'Install Module' button.

Repeat the above steps for all three modules.