Page History

...

https://inductiveautomation.com/downloads/ignition

The MQTT Modules are built to work with specific versions of Ignition.  The following table shows which MQTT Module versions work with which versions of Ignition.

Inductive has a short video showing how to install modules into Ignition.  You can watch the video or read on to learn how:

https://inductiveuniversity.com/video/installing-or-upgrading-a-module

...

To install, browse to your Ignition Gateway's web UI and select 'Configure'.  The default URL is:  http://127.0.0.1:8088

Image Removed

Image AddedThe default username / password when clicking 'Configure' is admin / password.  Once in the Configuration menu select 'Modules' under 'Configuration' on the left navigation bar.

Image RemovedImage Added

Once in the modules page, scroll to the bottom of the page and click 'Install or Upgrade a Module'

 Image Added

Image Removed

Once in the Install or Upgrade a module page, click the 'Choose File' button and browse to the MQTT Module to install.  Then click the Install button:

Image RemovedImage Added

After clicking the Install button your will be asked to accept the license agreement.  If you accept, click the 'I accept' tick box and then click the 'Accept License' button.

Image Added

You may also be asked to add the module's trusted certificate.  If so, click the 'Add Certificate and Install Module' button.

Image Added

The modules should now be successfully installed and appear in the list.

Image AddedImage Removed

Repeat the above steps for the modules each module that you are installing.