...
- Address
- Hostname or IP address of the Opto 22 device. Default is 192.168.1.100
- Note: The module does not support controller redundancy.
- TCP/IP Port
- Use the default port (22001).
- Timeout
- Amount of time the module waits for a response from the device. Value is in milliseconds with a minimum of 250 milliseconds and no upper limit. Default is 3000
- If your network is lossy or has high latency, you may want to increase the timeout value.
- Data Scan Rate
- Controls the poll rate ie. how often the module scans the device. Value Value is in millseconds milliseconds and the default is 1000.
- When reading large amounts of data, increase the number of milliseconds to allow more time for reads.
...
{"serverDuration": 111, "requestCorrelationId": "1adef88b9bab5f60"}