Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
Page History
...
| Anchor | ||||
|---|---|---|---|---|
|
| Note |
|---|
From release 4.0.14, MQTT Engine will match ALL namespaces for any incoming message. For example, two custom namespaces can be created where both subscribe on the same topic but one can be configured to parse the payload as JSON and one to parse the payload as string based. If MQTT Engine is receiving only custom namespace messages, we recommend disabling the Sparkplug B default namespace. If MQTT Engine is receiving messages from both the Sparkplug B default namespace and a custom namespace, you will need to ensure that your custom namespace subscription is refined so as not to pick up the messages from the Sparkplug B namespace (spBv1.0/......) From release 4.0.14, MQTT Engine will match ALL namespaces for any incoming message. For example, two custom namespaces can be created where both subscribe on the same topic but one can be configured to parse the payload as JSON and one to parse the payload as string based. |
MQTT Engine supports MQTT Engine String Replacement for both MQTT Topics and Payloads for character sequences that will become part of an Ignition tag path. While MQTT and Sparkplug both support characters such as . & % =, Ignition does not support these as valid characters in a tag path or tag name. As a result, sometimes it may be necessary to tell MQTT Engine to replace certain characters or strings of characters with something else so the tag path and tag names can be properly created in Ignition.
...
Overview
Content Tools