Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
...
...
...
From the Ignition left side bar, click on the Config tab and under the SYSTEM heading click on Modules. Scroll to the bottom of the page and click on the link → Install or Upgrade a Module...
...
When complete, the Ignition Gateway will show the current state of the installed modules:
...
...
No additional configuration is required for the MQTT Distributor or MQTT Engine modules.
...
Example below showing default MQTT Distributor Settings:
...
...
From the Ignition left side bar, click on the Config tab and under the SYSTEM heading click on Modules. Scroll to the bottom of the page and click on the link → Install or Upgrade a Module...
...
When complete, the Ignition Gateway will show the current state of the installed module:
...
...
MQTT Transmission needs to be configured to point to the MQTT Distribution server in order to publish data into MQTT Engine. To do this, select the Config tab on the left side bar and scroll to the bottom of the page and click on the "MQTT TRANSMISSION | Settings" link.
...
At this point are ready to edit the default tag, created as part of the MQTT Transmission installation, to send to MQTT Engine using the MQTT protocol and to do this we will use the Ignition Designer tool.
On each both the primary and secondary machine, select the Get Designer button from Ignition web portal to download, install and launch the Design Launcher.
...