Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
...
Warning |
---|
AWS IoT Core supports messages with a maximum message length of 128KB. If messages are received that exceed this limit AWS IoT Core will disconnect the client. Review our HowTo on ways to identify and resolve if this occurs |
The document comprises these sections:
Table of Contents | ||
---|---|---|
|
Before configuring MQTT Engine or MQTT Transmission, you must register a 'thing' connection in AWS IoT Core. Begin by browsing to AWS IoT Core in your AWS account. Make sure you are in the same AWS region that you intend to connect the MQTT Module to. Begin by expanding 'Secure' and click 'Policies' as shown below.
...
Anchor | ||||
---|---|---|---|---|
|
Using the Ignition Gateway Web UI, browse to the Ignition 'Config > MQTT Engine Settings > Servers' page. Now click the 'Certificates' tab as shown below:
...
This will allow MQTT Engine to buffer messages and reorder them should they be delivered out of order within a 3 second window. Generally 3 seconds seems to be plenty of time for the reordering with AWS IoT Core.
Anchor | ||||
---|---|---|---|---|
|
Using the Ignition Gateway Web UI, browse to the Ignition 'Config > MQTT Transmission Settings > Servers' page. Now click the 'Certificates' tab as shown below:
...
Configure an Transmitter as shown below and use Ignition Designer to created an appropriate tag tree in the default provider.
Tip |
---|
Review the MQTT Transmission Transmitters and Tag Trees document for more information on how Transmitter configs and Ignition tag trees interact |
The server connection will now show the connected client as '1 of 1'
...
To confirm messages are published from Transmission, navigate to the Ignition logs and Refresh Transmission. This will cause the client to disconnect and , reconnect and publish its BIRTH messages.
...
On a Transmission Refresh you will see all DEATH messages published on the disconnect along with the new BIRTH messages on the reconnect.
Excerpt Include | ||||||
---|---|---|---|---|---|---|
|