Page History

...

The document comprises these sections:

Table of Contents
minLevel 2

Provisioning the 'Thing'

Before configuring MQTT Engine or MQTT Transmission, you must register a 'thing' connection in AWS IoT Core. Begin by browsing to AWS IoT Core in your AWS account. Make sure you are in the same AWS region that you intend to connect the MQTT Module to. Begin by expanding 'Secure' and click 'Policies' as shown below.

...

Using the Ignition Gateway Web UI, browse to the Ignition 'Config > MQTT Engine Settings > Servers' page. Now click the 'Certificates' tab as shown below:Image Added

Image Removed

Now click the 'Create new Certificate' link. Then upload one of the three files previously downloaded when creating the IoT Core 'Thing'. Once completed, your Certificates page should look similar to the following with all three files.Image RemovedImage Added

Now, click the 'Servers' tab as shown below.

...

If you are only going to be connecting to AWS IoT Core, edit the existing 'Chariot SCADA' setting. Otherwise, create a new MQTT Server Setting. This should bring up the following page.Image Added

Image Removed

Set the following.

• Name
  • AWS IoT Core
• URL
  • The URL that was captured from the AWS IoT Core setting page. It should be of the form: ssl://ENDPOINT_URL:8883
  • Example: ssl://a33fdj134jkj10-ats.iot.us-east-1.amazonaws.com:8883
• Server Set
  • Default
• Username
  • Blank
• Password
  • Blank
  • Note if a password was previously set, make sure to click the 'Change Password' checkbox and ensure the password fields are empty
• CA Certificate File
  • The 'Root CA' that was downloaded from AWS IoT Core
• Client Certificate File
  • The 'Client Cert' that was downloaded from AWS IoT Core
• Client Private Key File
  • The 'Client Private Key' that was downloaded from AWS IoT Core.

Leave all other fields blank and submit the configuration. If everything was set up properly, the 'Status' should show 'Connected' when complete.Image Added

Anchor
CustomProperties CustomProperties

For MQTT Engine, you must also set the 'reordering timeout' due to timing issues related to IoT Core message delivery. To do this, set the Custom Properties on the MQTT Engine General tab to: { "reorderingTimeout" : 3000 } as shown below and save the changes.

...

On a Transmission Refresh you will see all DEATH messages published on the disconnect along with the new BIRTH messages on the reconnect.

Excerpt Include
CLD80:FAQ: Ignition Modules CLD80:FAQ: Ignition Modules nopanel true