Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
...
Info |
---|
Google IoT Core was retired in summer or 2023. Clearblade IoT Core provides a drop-in replacement for the MQTT Server endpoint. As a result, it Clearblade IoT Core works with Cirrus Link's Google Cloud Injector and the Google Cloud. More information is available here: https://iot.clearblade.com. |
...
...
Once you have Ignition and the Google Cloud Injector Module installed and running we can setup the configuration to connect to your existing Cloud Clearblade IoT Core.
Tip |
---|
Review the Google Cloud Injector Module configuration guide for more details on each tab |
Navigate to the Google Cloud Injector Modules configuration section from the left side bar in the Ignition Gateway and select the Cloud Clearblade IoT Core tab.
Set the following parameters:
...
If you do not have Ignition tags defined we will do that , that will be done in the next step with a tag tree depth that requires no additional Sparkplug settings.
...
Tip |
---|
Refer to the Ignition Tag Browser and Creating Tags documentation for assistance in configuring Ignition tags |
...
Make sure that the Ignition Designer has read/write communications turned on by selecting the Project/Comm Read/Write button highlighted in the image below.
Tip |
---|
Review the Inductive Automation Designer Interface documentation for additional assistance on setting the project communication mode |
...