Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
...
Logger: com.cirruslink.emersonroc.EmersonRocDriver
Examples of errorsError examples:
Code Block |
---|
['M-205' 10.0.40.169:4000] No Orifice meter configuration found at logical number 2 ['M-205' 10.0.40.169:4000] No Orifice meter configuration found at logical number 3 |
...
Logger: com.cirruslink.emersonroc.protocol.model.opcode.OpCodeDataContainer
Example of errorsError examples:
Code Block |
---|
Failed to parse TLPs for pointType=7 and parameterNumber=178. Enable 'TRACE' for details. Failed to parse out TLP Array. Enable 'DEBUG' for details. |
...
Logger: com.cirruslink.emersonroc.protocol.model.point.DynamicPointTypeParameter
Example of errorsError examples:
Code Block |
---|
Invalid length: 4 for DataType: UINT16 - changing to default length: 2 Invalid length: 1 for DataType: FL - changing to default length: 4 Invalid length: 5 for DataType: UINT32 - changing to default length: 4 |
Logger: com.cirruslink.common.util.exception.CirrusException
Error examples
Code Block |
---|
Error handling TLPs in the template. Check the TLP definitions for this device and verify the following TLPs are defined. [196,l,25]
Error handling TLPs in the template. Check the TLP definitions for this device and verify the following TLPs are defined. [196,l,26], [196,l,30], [196,l,31], [196,l,32], [196,l,33], [196,l,34], [196,l,39], [196,l,40], [196,l,41], [196,l,42], [196,l,43], [196,l,44], [196,l,45], [196,l,46], [196,l,47], [196,l,48], [196,l,49], [196,l,50], [196,l,51], [196,l,52], [196,l,53], [196,l,54], [196,l,59], [196,l,60], [196,l,68], [196,l,72], [196,l,73], [196,l,75], [196,l,76], [196,l,78], [196,l,79], [196,l,80], [196,l,86], [196,l,87], [196,l,90], [196,l,91], [196,l,94], [196,l,95], [196,l,96], [196,l,97], [196,l,140], [196,l,141], [196,l,142], [196,l,143], [196,l,144], [196,l,145], [196,l,146], [196,l,147], [196,l,148], [196,l,149], [196,l,150], [196,l,151], [196,l,160], [196,l,161], [196,l,162], [196,l,186], [196,l,186], [196,l,187], [196,l,188], [196,l,191], [230,l,40] |
Note |
---|
To change logging levels, go to the Gateway's Status > Diagnostics > Logs page and click on the Settings icon. On the Log Configuration popup that will open, search for the logger name in the Filter box, and select the desired logging level from the dropdown to the right of the logger name |
...