Cirrus Link Website
Contact Us (Sales/Support)
Forum
Chariot MQTT Server Documentation
Cirrus Link Modules Docs for Ignition 8.x
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
...
MQTT Transmission needs to be modified to point to the MQTT Server (MQTT Distributor) in order to get data into MQTT Engine. To do so, browse to Ignition Edge MQTT with a web browser. Then click 'Configure' at the top, log in, and select MQTT Transmission 'Settings' on the left panel near the bottom. Then select the 'Servers' tab. Finally, click the 'edit' button to the right of the 'Chariot SCADA' definition as shown below.
At this point, modify the URL to point to the Central Ignition Gateway's IP address. For example, if you central Ignition gateway is at 10.10.10.123, set the URL to tcp://10.10.10.123:1883. Then save your settings.
Now select 'Sets' at the top and click the 'edit' button next to the 'Default' Server Set as shown below.
Now set the 'Primary Host ID' to the same ASCII string that was set in MQTT Engine previously as shown below and save the changes.
...