Page History

...

In the MQTT Transmission Settings configuration, click the Servers tab.  Then click 'edit' on the Chariot SCADA MQTT Server definition.  Modify the URL to match the URL of the Central Ignition Gateway.  In this example, MQTT Distributor is installed on a Central Ignition Gateway at the IP address of 192.168.1.2.  Once the URL is modified to match the configuration, there should be a '1 of 1' in the Connected column as shown below.

Image RemovedImage Added

The next step is configuring the ABB Totalflow module.  This is done as described in the ABB Totalflow Configuration manual.  In going through the basic setup and configuration for History configuration the following steps must be performed:

...