The Opto 22 SNAP PAC Driver module is an Ignition driver for accessing Tags directly from Opto 22 SNAP PAC™ controllers and OptoEMU™ sensors.
Supported Opto 22 products and firmware
- All SNAP PAC controllers and SoftPAC™ software-based controllers with PAC firmware R9.2c or higher
- All OptoEMU energy management sensors with OptoEMU firmware R3.0b or higher
For the versions of Ignition recommended for this driver, see Cirrus Link’s Module Installation.
To download the driver module:
- Go to Inductive Automation’s Ignition Downloads webpage.
- Scroll down to Third Party Modules.
- Under Cirrus Link Solution MQTT Modules for Ignition, select Opto-22-SNAP-PAC-Driver-signed.modl.
More information including installation instructions can be found in the links below.