The Opto 22 groov EPIC and SNAP PAC Driver module is an Ignition driver for accessing Tags directly from Opto 22 groov EPIC and SNAP PAC™ controllers.

Supported Opto 22 products and firmware

• All groov EPIC and SNAP PAC controllers and SoftPAC™ software-based controllers with PAC firmware R9.2c or higher

For the versions of Ignition recommended for this driver, see Cirrus Link’s Module Installation.

To download the driver module:

1. Go to Inductive Automation’s Ignition Downloads webpage.
2. Scroll down to Third Party Modules. 
3. Under Cirrus Link Solution MQTT Modules for Ignition, select Opto-22-groov-EPIC-and-SNAP-PAC-Driver-signed.modl.

More information including installation instructions can be found in the links below.

• Cirrus Link Module Installation
  • Step by step instructions to install modules into Ignition
• Opto 22 groov EPIC and SNAP PAC Module Configuration
  • Configuration guide for the Opto 22 module
• Opto 22 groov EPIC and SNAP PAC Module Tutorials/Howtos
  
  • Tutorials and howtos covering installation, configurations, and usage of AWS Injector
• Opto 22 groov EPIC and SNAP PAC Module Videos
  • Installing the Driver module
  • Configuring the Driver module
  • Scanning Specific Tags