EFM Emerson ROC provides a configuration section to the Ignition Gateway that can be seen in the Configure section of the Ignition Gateway web UI. There is one configuration page - 'Settings'

Figure 1. EFM Emerson ROC Module Configuration.

Settings

The EFM Emerson ROC Settings configuration page allows user to create TLP Definitions as shown below:

Figure 2. EFM Emerson ROC Settings -- TLP Definitions.

New TLP Definitions can be created by following the 'Create new TLP Definition' link as shown below:

Figure 3. EFM Emerson ROC Settings -- New TLP Definition.

Main Properties

Name
- This is the friendly name of the TLP Definition being created
CSV File
- Click the 'Browse' button to select CSV file for this TLP Definition

Emerson ROC Device Connection

Device connection for Emerson ROC module can be configured via OPC-UA SERVER.

Figure 4 -- Emerson ROC Device Connection.

Selecting 'Devices' opens respective configuration page as shown below:

Figure 5. EFM Emerson ROC Device Connection -- Devices.

New Emerson ROC device can be created by following the 'Create new Device...' link and choosing 'EFM Emerson ROC' device as shown below:

Figure 6. EFM Emerson ROC Device Connection -- Choose Device Type.

This opens the 'New Device' configuration mage for EFM Emerson ROC Device:

Figure 7. EFM Emerson ROC Device Connection -- Configuring New Device.

General

Name
- Device name
Description
- Device description
Enabled
- Device enabled

Connectivity

Protocol Type
- Specific Protocol Type of the device
  - ROC
  - ROC_PLUS
Hostname
- Hostname or IP address of the device
TCP Port
- TCP Port of the device.
ROC Unit Code
- Station Address Unit Code of the ROC unit
ROC Group Code
- Station Address Group Code of the ROC unit
Host Unit Code
- Station Address Unit Code of the host (this driver)
Host Group Code
- Station Address Group Code of the host (this driver)

Records

Alarm Scan Rate
- The rate in seconds that alarm records are scanned
- Set to -1 to disable alarm scanning (default)
Event Scan Rate
- The rate in seconds that event records are scanned
- Set to -1 to disable event scanning (default)
Minute History Scan Rate
- The rate in seconds that minute history records are scanned
- Set to -1 to disable minute history scanning (default)
Periodic History Scan Rate
- The rate in seconds that periodic history records are scanned
- Set to -1 to disable periodic history scanning (default)
Daily History Scan Rate
- The rate in seconds that daily history records are scanned
- Set to -1 to disable daily history scanning (default)

Sparkplug

Group ID
- An ID representing a logical grouping of Edge Nodes and Devices
Edge Node ID
- An ID representing an Edge or Network (EoN) Node
Device ID
- An ID representing a Device