EFM Emerson ROC provides a configuration section to the Ignition Gateway that can be seen in the Configure section of the Ignition Gateway web UI. There is one configuration page - 'Settings'

Settings

The EFM Emerson ROC Settings configuration page allows user to create TLP Definitions as shown below:

New TLP Definitions can be created by following the 'Create new TLP Definition' link as shown below:

Main Properties

• Name
  • This is the friendly name of the TLP Definition being created
• CSV File
  
  • Click the 'Browse' button to select CSV file for this TLP Definition

Click here to download the Cirrus Link default TLP and mapping files - Note these need to be thoroughly tested and reviewed in your application before they are put into production.

The downloaded zip file contains:

     FB107-TLPs-V1_0.csv

     FB107-Meter_Configuration_Mapping-V1_0.csv

     FB107-Orifice_Turbine_Meter_Periodic_History_Mapping-V1_0.csv

     ROC800-TLPs-V1_0.csv

     ROC800-Meter_Configuration_Mapping-V1_0.csv

     ROC800-Orifice_Turbine_Meter_Periodic_History_Mapping-V1_0.csv

     UserProgram-TLPs-V1_0.csv

Emerson ROC Device Connection

Device connection for Emerson ROC module can be configured via OPC-UA SERVER.

Selecting 'Devices' opens respective configuration page as shown below:

New Emerson ROC device can be created by following the 'Create new Device...' link and choosing 'EFM Emerson ROC' device as shown below:

This opens the 'New Device' configuration mage for EFM Emerson ROC Device:

General

• Name
  • Device name
• Description
  
  • Device description
• Enabled
  • Device enabled

Connectivity

• Protocol Type
  • Specific Protocol Type of the device
    
    • ROC
    • ROC_PLUS
• Hostname
  • Hostname or IP address of the device
• TCP Port
  • TCP Port of the device.
• ROC Unit Code
  • Station Address Unit Code of the ROC unit
• ROC Group Code
  • Station Address Group Code of the ROC unit
• Host Unit Code
  • Station Address Unit Code of the host (this driver)
• Host Group Code
  • Station Address Group Code of the host (this driver)

Records

• Alarm Scan Rate
  • The rate in seconds that alarm records are scanned
  • Set to -1 to disable alarm scanning (default)
• Event Scan Rate
  • The rate in seconds that event records are scanned
  • Set to -1 to disable event scanning (default)
• Minute History Scan Rate
  • The rate in seconds that minute history records are scanned
  • Set to -1 to disable minute history scanning (default)
• Periodic History Scan Rate
  • The rate in seconds that periodic history records are scanned
  • Set to -1 to disable periodic history scanning (default)
• Daily History Scan Rate
  • The rate in seconds that daily history records are scanned
  • Set to -1 to disable daily history scanning (default)

Sparkplug

• Group ID
  • An ID representing a logical grouping of Edge Nodes and Devices
• Edge Node ID
  • An ID representing an Edge or Network (EoN) Node
• Device ID
  • An ID representing a Device

When all EFM Emerson ROC devices are configured, the Devices page will look as shown below:

To finish configuring Emerson ROC and connect to physical devices, TLP definitions for each device need to be provided as described in the 'Specifying TLP Definitions for a Device' section of the EFM Emerson ROC Quickstart document. In short, the following three things need to be done:

• Specify TLP Definitions 
• Provide TLP Templates by importing TLP-template CSV file
• Configure TLP Poll Groups by importing TLP-poll-group CSV file

When this is done, the 'Devices' configuration page will look as shown below with the 'Status' of each device set to 'Connected'.