Page History

...

Step 4: Configure Redundancy

The following configuration shows all of the redundancy settings that were used in setting this environment up using Amazon's AWS EC2 instances (virtual machines).  The configuration will vary based on your network configuration.  Additional Ignition redundancy resources can be found at the following links:

https://docs.inductiveautomation.com/display/DOC/Setting+Up+Redundancy
https://support.inductiveautomation.com/usermanuals/ignition/index.html?redundancy_settings.htm

• Ignition Primary
  • Select Redundancy on the left navigation bar. Then set the Mode to 'Master' and set the Standby Activity left to 'Warm' as shown below.
    
  • Set up the Redundancy Network Settings.  The settings here are specific to your network setup.  What is shown below was the configuration for setting up all of these components in Amazon's AWS EC2 instances.
    
• Ignition Primary Backup
• Ignition Edge 1
• Ignition Edge 1 Backup
• Ignition Edge 2
• Ignition Edge 2 Backup

...