...
- Client ID
- Keep Alive
- The maximum interval in seconds (5-65,535) between any two MQTT protocol control packets sent by the client to the server.
- The minimum Keep Alive for MQTT Transmission is 5.
- If the client is idle and has no control packets to send, it will send PINGREQ protocol packet and the server is required to respond with a PINGRESP packet. If no response is received from the server within 1.5 times the Keep Alive, the client will close the connection.
If the server does not receive, at minimum, a PINGREQ message from a client within 1.5 times the Keep Alive, it will terminate the connection and send the client's LWT if it has been defined.
For MQTT Transmission, this is an DEATH message.
- Random Startup Delay
- The Random Startup Delay in milliseconds of the form 'min-max' where min is the low end and max is the high end of the random range. e.g. '10-1000'.
- Reconnect Delay
- The clients reconnect delay in millisecond.
- Subscribe to Legacy STATE Topic
- Data Format Type
- The format of the data to send. Default is Sparkplug_B_v1_0_Protobuf with JSON as an option.
Anchor |
---|
| ServerSettingsRPCClient |
---|
| ServerSettingsRPCClient |
---|
|
Server Settings - RPC Client Connection
...
Anchor |
---|
| TransmittersAlarmSettings |
---|
| TransmittersAlarmSettings |
---|
|
Transmitters - Alarm Settings
Tip |
---|
Available in MQTT Transmission 4.0.16 and newer |
...
Anchor |
---|
| TransmittersAdvancedSettings |
---|
| TransmittersAdvancedSettings |
---|
|
Transmitters - Advanced Settings
Image RemovedImage Added- Filtered Properties
- Rebirth Debounce Delay
- The amount of time, in milliseconds, to delay before processing Rebirth NCMD requests after one has been processed. Default of 5000 milliseconds.
- Include Sparkplug DataTypes
- Whether or not to include Sparkplug DataTypes for Metrics in Sparkplug DATA payloads
- Enabled by default
Records
...