Page History

...

You will now be asked to specify a password for the keypair.  At this point MQTT Distributor requires that the Key Pair passwords match the overall Keystore password.  So, make sure you note this password because we'll need to use it as the overall keystore password as well.

If your CA certificate also requires an intermediate certificate you must also import that as a trusted certificate.  That is done by clicking the red certificate icon shown below.  If you are using a self-signed certificate, you also need to complete this step using your own CA's public certificate:

Image Removed

, it must be appended to the keypair.  Do so by right-clicking the keypair and navigating to Append Certificate as shown below:

Image Added

Now browse to your intermediate Select your trusted certificate as shown below and click ok:

Image Removed

You will be asked to verify the public certificate's details.  They will look similar to the following depending on the CA.  Double check the information and select OK:

Append:

Image AddedImage Removed

You should now see something similar to the following:

Image Removed

.  Simply click OK.

Image Added 

At this point, you can save your keystore and specify a keystore password.  Do so by clicking the save icon in the upper left menu:

...