Page History

...

In addition to setting up an Edge Node with the Default Transmitter as we did above, we must also modify the MQTT Transmission server configuration to point to the Central Ignition Gateway we set up earlier.  To do so, in the Ignition Gateway Web UI browse to the Configure tab on the top and then to MQTT Transmission Settings in the lower left as shown below.

Once in the MQTT Transmission Settings configuration, click the Servers tab.  Then click 'edit' on the Chariot SCADA MQTT Server definition.  Modify the URL to match the URL of the Central Ignition Gateway you have configured.  In this example, MQTT Distributor is installed on a Central Ignition Gateway at the IP address of 192.168.1.53.  You should not have to modify any other parameters because MQTT Distributor and MQTT Engine have been left in their default state.  Once you have modified the URL to match your configuration, you should see a '1 of 1' in the Connected column as shown below.

Image Added

At this point, MQTT