Page History

...

Now perform the following actions.

• Under the 'Edge Node' folder, create a new folder called 'Group 1'
• Under the 'Group 1' folder, create a new folder called 'Edge Node 1'
• Under the 'Edge Node 1', create a new folder called 'Device 1'
• Under the 'Device 1' folder, create a new Memory Tag as shown below.

Image Added

When done with the steps above, you should have a folder/tag structure as shown below.

Image Added

At this point, we can start the Transmitter by writing to the 'Transmission Control/Refresh' boolean tag.  Writing to this tag tells MQTT Transmission to rescan the entire tag tree, detect the folders and tags present, and then begin publishing Sparkplug messages to the MQTT Server.  The location of the tag to write to is shown below.

Image Added

Step 6: Verify MQTT Transmission is Connected

asd