Page History

...

Upon completion of this tutorial you will have all of the required components to configure, deploy, and observe the Sparkplug MQTT specification in action.

Architecture

Image RemovedImage Added

Tutorial

Step 1: Download and Install Ignition Gateway

...

• Install MQTT Distributor and MQTT Engine into the Ignition Gateway installed in step 1.
• Install MQTT Transmission into Ignition Edge MQTT that was installed in step 2.

Step 4:

...

Install the MQTT Modules

Once you have Ignition installed and running, and the MQTT Distributor, MQTT Engine and MQTT Transmission modules downloaded, browse to the Ignition Gateway console (e.g. http://localhost:8088).

Log in to the Ignition Gateway installed in step 1   Login using the default credentials of admin/password.  Click on Configuration tab and then click on the Modules tab on the left side of the page.  Scroll to the bottom of the Modules section and click on the Download/Upgrade modules button.  When prompted, select the MQTT Distributor module from the file browser and install it.  Do the same for the MQTT Engine module.  When complete, the Ignition Gateway Web UI module section should look similar to what is shown below.

Image Added

Now log in to the Ignition Edge MQTT installed in step 2 using the default credentials of admin/password.  Click on Configuration tab and then click on the Modules tab on the left side of the page.  Scroll to the bottom of the Modules section and MQTT Transmission modulesclick on the Download/Upgrade modules button.  When prompted, select the MQTT Transmission module from the file browser and install it.  When complete, the Ignition Gateway Edge MQTT Web UI module section should look similar to what is shown below.

Image Added