...
- Name
- This is the friendly name of the MQTT Server used to easily identify it
- URL
- This is the URL of the MQTT server. Its format is as follows: [protocol]://[location]:[port]. Each of these are shown below
- protocol - Either tcp or ssl
- location - The server location. e.g. localhost, myserver.chariot.io, mydomain.com, etc
- port - The port the MQTT Server is listening on. Generally this is 1883 if using TCP or 8883 if using SSL
- Server Type
- This is the type of MQTT Server to connect to
- Chariot - If connecting to a Cirrus Link Chariot on-premise or Chariot cloud based MQTT Server
- MQTT_Distributor - If connecting to a Ignition MQTT Distributor server
- Third_Party - If connecting to a third party 3.1.1 compliant MQTT Server
- AWS_Greengrass - If connectiong to an AWS Greengrass Server.
- Note: This server type should not be used whe using MQTT Transmission in conjunction with MQTT Engine.
- Server Set
- The Set that this server is a member of.
- Username
- The MQTT username to use in the MQTT connect packet. This is required if the MQTT Server to connect to requires it.
- Password
- The MQTT password to use in the MQTT connect packet. This is required if the MQTT Server to connect to requires it.
...
{"serverDuration": 104, "requestCorrelationId": "f67658615b2cfb09"}