Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
Page History
...
- Create a Database Audit Profile
- On the MQTT Transmission General tab, set the Audit Profile parameter to your database audit profile
- Restart the MQTT Transmission module to pick up the audit profile
| Note |
|---|
The audit log will only include successful tag writes. If a tag write is attempted with an invalid security context, the com.cirruslink.mqtt.common.gateway.agent.Agent will create a Warning log entry similar to the one shown below
|
...
| Name | Description of value |
|---|---|
| EVENT_TIMESTAMP | The timestamp that the tag write using the security context was performed in the format YYYY-MM-DD HH:MM:SS:mmm |
| ACTOR | Set to "unknown" (Ignition 8.1.33 or lower) Set to username (Ignition 8.1.34 or higher and MQTT Engine 4.0.20 or higher) |
| ACTOR_HOST | The originating host system gateway name |
| ACTION | Set as "tag write" |
| ACTION_TARGET | The tag path for the tag that is being written to |
| ACTION_VALUE | The Qualified Value (value, quality, timestamp) for the tag write |
| STATUS_CODE | Currently not used - set as "0" |
| ORIGINATING_SYSTEM | The system generating the audit record - set as "MQTT Transmission:DCMD Write" |
| ORIGINATING_CONTEXT | Currently not used - set as "0" |
| Excerpt Include | ||||||
|---|---|---|---|---|---|---|
|
...
Overview
Content Tools