Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
Cirrus Link's Ignition Modules can be downloaded from from the " Ignition Strategic Partner " section of this web page:https://inductiveautomation.com/downloads/ignitionModules download page.
The modules are built to work with specific versions of Ignition . This and this page shows which versions of the Cirrus Link modules are compatible with which versions of Ignition.
Inductive Automation has a short short video showing how to install modules into Ignition . You can watch the video or read on to learn how:
https://inductiveuniversity.com/video/installing-or-upgrading-a-module
...
along with specific videos for each of the MQTT Modules
...
as well:
...
To install, browse to your Ignition Gateway's web UI and select 'Configure'. The (the default URL is: http://localhost:8088
The ) and login, if required, using the default username / password is configured by the user when the gateway is was installed.
First select Config on From the Ignition left hand side bar, click on the Config tab:
Once in the Configuration menu select 'Modules' under 'Configuration' on the left navigation bar.
Under the SYSTEM heading click on Modules.
Scroll Once in the modules page, scroll to the bottom of the page and click 'on the link "→ Install or Upgrade a Module'
..."
Select the 'Browse' button, Once in the Install or Upgrade a module page, click the 'Choose File' button and browse to the MQTT Module to install . Then and then click the Install button:.
After clicking the Install button your will you may be asked to accept the license agreement. If you accept, click the 'I accept' tick check box and then click the 'Accept License' button.
You may also be asked to add the module's trusted certificate. If so, click the 'I want to add this certificate to my trusted certificates and install the module' check box and then click the 'Add Certificate and Install Module' button.
The modules should now be successfully installed and appear in the list .under the Cirrus Link Solutions LLC heading:
Repeat the above steps for each module that you are installing.
...