Opto 22 groov EPIC and SNAP PAC Driver Module Configuration

NOTES:

For the versions of Ignition recommended for this driver, see Cirrus Link's Module Installation.

To download the driver module:

1. Go to Inductive Automation's Ignition Downloads webpage.
2. Scroll down to Third Party Modules. 
3. Under Cirrus Link Solution MQTT Modules for Ignition, select Opto-22-groov-EPIC-and-SNAP-PAC-Driver-signed.modl.

...

1. In Ignition, add the Opto 22 groov EPIC and SNAP PAC Driver module as a New OPC-UA Server Device.
2. Select Opto 22 groov EPIC and SNAP - PAC to open its configuration settings.
3. Enter a name for the device and its hostname or IP address. (Configuration options are described in step 5.)
4. GetTags4588237

Instructions

Step 1

In the Ignition Gateway Configuration webpage, find the Devices link (under OPC-UA Server).

...

On the Devices webpage, click Create new Device. Then, on the Add Device Step 1: Choose Type webpage, select Opto 22 groov EPIC and SNAP - PAC.

Image RemovedImage Added

TIP:   If you can't find the module, check the following:

...

Get Tags from the Opto 22 Device

Anchor
GetTags GetTags

The Opto 22 groov EPIC and SNAP PAC Driver module can:

...

• If you can't find a tag, check that the strategy is running in PAC the Control.
• If you don't see tags for tables, that's because you can get table data only when you scan for specific tags. For details, see Scanning Specific Tags.)
• Check the Ignition Gateway Logs (Status tab > Diagnostics > Logs) for messages about the issue you're experiencing.
• For more troubleshooting tips, see see Scanning Specific Tags.

...