...
To download the driver module:
- Go to Inductive Automation's Ignition Downloads webpage.
- Scroll down to Third Party Modules.
- Under Cirrus Link Solution MQTT Modules for Ignition, select Opto-22-groov-EPIC-and-SNAP-PAC-Driver-signed.modl.
...
- In Ignition, add the Opto 22 groov EPIC and SNAP PAC Driver module as a New OPC-UA Server Device.
- Select Opto 22 groov EPIC and SNAP - PAC to open its configuration settings.
- Enter a name for the device and its hostname or IP address. (Configuration options are described in step 5.)
- GetTags4588237
Instructions
Step 1
In the Ignition Gateway Configuration webpage, find the Devices link (under OPC-UA Server).
...
On the Devices webpage, click Create new Device. Then, on the Add Device Step 1: Choose Type webpage, select Opto 22 groov EPIC and SNAP - PAC.
Image RemovedImage Added
TIP: If you can't find the module, check the following:
...
Get Tags from the Opto 22 Device
The Opto 22 groov EPIC and SNAP PAC Driver module can:
...
- If you can't find a tag, check that the strategy is running in PAC the Control.
- If you don't see tags for tables, that's because you can get table data only when you scan for specific tags. For details, see Scanning Specific Tags.)
- Check the Ignition Gateway Logs (Status tab > Diagnostics > Logs) for messages about the issue you're experiencing.
- For more troubleshooting tips, see see Scanning Specific Tags.
...