Page History

...

• Name
  • Device name
• Description
  
  • Device description
• Enabled
  • Checkbox to enable/disable device. Selected by default
    
    

• Address
  • Hostname or IP address of the Opto 22 device. Default is 192.168.1.100
  • Note: The module does not support controller redundancy.
• TCP/IP Port
  • Use the default port (22001).
• Timeout
  • Amount of time the module waits for a response from the device.
  • Value is in milliseconds with a minimum of 250 milliseconds and no upper limit. Default is 3000
  • If your network is lossy or has high latency, you may want to increase the timeout value.
• Data Scan Rate
  • Controls the poll rate ie. how often the module scans the device. 
  • Value is in millseconds and the default is 1000.
  • When reading large amounts of data, increase the number of milliseconds to allow more time for reads.

...