Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Forum
Cirrus Link Modules Docs for Ignition 7.9.x
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
Cirrus Link's Ignition Modules can be downloaded herefrom the "Strategic Partner" section of this web page:
https://inductiveautomation.com/downloads/ignition
...
To install, browse to your Ignition Gateway's web UI and select 'Configure'. The default URL is: http://127.0.0.1localhost:8088
is configured by the user when the gateway is installed.
The default username / passwordFirst select Config on the left hand side:
when clicking 'Configure' is admin / password. Once in the Configuration menu select 'Modules' under 'Configuration' on the left navigation bar.
Once in the modules page, scroll to the bottom of the page and click 'Install or Upgrade a Module'
Once in the Install or Upgrade a module page, click the 'Choose File' button and browse to the MQTT Module to install. Then click the Install button:
After clicking the Install button your will be asked to accept the license agreement. If you accept, click the 'I accept' tick box and then click the 'Accept License' button.
You may also be asked to add the module's trusted certificate. If so, click the 'Add Certificate and Install Module' button.
The modules should now be successfully installed and appear in the list.
Repeat the above steps for each module that you are installing.
...