Page History

...

TIP: If you can't find a tag, check the following:*

• The strategy is running in PAC Control.

...

• You correctly entered the tag name in the stPublicListOfStrategyTags table.

...

• After making changes to the table, you restarted the Driver module in Ignition and waited for its status to change to Connected.

For more information, see the Ignition Gateway’s Logs (Status tab > Diagnostics > Logs).

If your device's status doesn't change to "Connected" after you've restarted it in Ignition Gateway (Configure tab > System > Modules), make sure: *

• Element 0 in the stPublicListOfStrategyTags table is not blank (or empty).

...

• The network configuration of both the OPC-UA device and the Opto 22 device are valid.

...

• The Opto 22 device is powered up, connected to the network, and the host task is assigned to TCP/IP port 22001.

...

• Your Windows PC is connected to the network and operating normally.