Contents
Cirrus Link Resources
Cirrus Link Website
Contact Us (Sales/Support)
Inductive Resources
Ignition User Manual
Knowledge Base Articles
Inductive University
Forum
...
https://inductiveautomation.com/downloads/ignition
The MQTT Modules are built to work with specific versions of Ignition. The following table shows which MQTT Module versions work with which versions of Ignition.
MQTT Modules Version | |||||||||
1 | Distributor v1.7.X | Engine v1.7.X | Injector v1.7.X | Transmission v1.7.X | x | 1Distributor v1.8.XxEngine v1 | 2.80.XxInjector v1 | 3.8.XTransmission v1.8.X0.x | |
---|---|---|---|---|---|---|---|---|---|
Ignition v7.7. | XX | Xx | X | X | |||||
Ignition v7.8.x | X | X | |||||||
Ignition v7.9.x | X | X | XX |
Inductive has a short video showing how to install modules into Ignition. You can watch the video or read on to learn how:
https://inductiveuniversity.com/video/installing-or-upgrading-a-module
...
To install, browse to your Ignition Gateway's web UI and select 'Configure'. The default URL is: http://127.0.0.1:8088
The default username / password when clicking 'Configure' is admin / password. Once in the Configuration menu select 'Modules' under 'Configuration' on the left navigation bar.
Once in the modules page, scroll to the bottom of the page and click 'Install or Upgrade a Module'
Once in the Install or Upgrade a module page, click the 'Choose File' button and browse to the MQTT Module to install. Then click the Install button:
After clicking the Install button your will be asked to accept the license agreement. If you accept, click the 'I accept' tick box and then click the 'Accept License' button.
You may also be asked to add the module's trusted certificate. If so, click the 'Add Certificate and Install Module' button.
The modules should now be successfully installed and appear in the list.
Repeat the above steps for the modules each module that you are installing.