Page History

...

But, before this will happen we need to point MQTT Transmission to the Chariot MQTT Server. To do so, browse back to the Ignition Gateway Web UI and select MQTT Transmission → Settings from the left navigation panel as shown below.

Image Removed

Now select Select the 'Transmitters' tab as shown below.Image RemovedImage Added

Now click the 'edit' button to the right of the 'Example Transmitter'. Scroll down to the 'Convert UDTs' option and uncheck it as shown below. This will also un-grey the 'Publish UDT Definitions' option. Leave it selected as shown below.Image RemovedImage Added

Now switch to the 'Servers' and 'Settings' tab. Delete the existing 'Chariot SCADA' pre-seeded MQTT Server Definition. Then create a new one with the following configuration.

...

When complete, you should see something similar to the following. However, the 'Connected' state should show '1 of 1' if everything was configured properly.

Image AddedImage Removed

At this point, data should be flowing into Snowflake.

...