Page History

...

At this point IoT Bridge is configured and ready to receive data. To get data flowing into IBAS we'll set up Inductive Automation's Ignition platform along with the MQTT Transmission module from Cirrus Link. Begin by downloading Ignition here.

https://inductiveautomation.com/downloadsIgnition Downloads

Installation of Ignition is very straightforward and fast. There is a guide to do so here.

https://docs.inductiveautomation.com/display/DOC80/Installing+and+Upgrading+IgnitionIgnition Installing or Upgrading

With Ignition installed, MQTT Transmission must be installed as well as a plugin to Ignition. Get MQTT Transmission for your version of Ignition here.

https://inductiveautomation.com/downloads/third-party-modulesIgnition Third Party Modules

Now use the procedure below to install the MQTT Transmission module.

https://docs.inductiveautomation.com/display/DOC80/Installing+or+Upgrading+a+Ignition Installing or Upgrading a Module

With Ignition and MQTT Transmission installed, we can configure the MQTT Transmission module to connect to AWS IoT Core using the same certificates that we provisioned earlier. Begin by clicking 'Get Desginer' in the upper right hand corner of the Ignition Gateway Web UI as shown below.

...