Page History

...

• Ensure you have a platform that supports either Linux 64-bit Docker images or ARM HF images
• Hilscher provides a number of gateways that support 64-bit Linux containers and ARM HF containers
  • https://www.hilscher.com/products/product-groups/industrial-internet-industry-40/netiot-edge/
  • netIOT/netFIELD Edge 
  • netPihttps://www.netiot.com/netpi/industrial-raspberry-pi-3/
• This tutorial will use Portainer to set up and configure the container.  However, this could all be done via the command line if you prefer.

...

Upon completion of this tutorial you will have Ignition Edge MQTT IIoT installed as a Docker container which will be ready to configure and use.

...

Begin by ensure Portainer is running and you are set up to manager the target Docker environment.  Information on Portainer can be found here.  If using a Hilscher Edge device consult the Hilscher documentation for access to the Portainer Portal.

Step 2: Download the Ignition Edge

...

IIoT image

Open a Web Browser to your Portainer instance and select 'Images' on the left.  In the name section enter one of the two following strings depending on your platform architecture:

...

The repositories can be viewed here:

• Ignition Edge MQTT Linux 64-bit
• Ignition Edge MQTT ARM HF
• https://hub.docker.com/r/cirruslink/ignition-edge-linux-64/
• https://hub.docker.com/r/cirruslink/ignition-edge-linux-armhf/

Shown below is an example for 64-bit Linux.  After entering the target image into the name field, click the 'Pull the Image' button to download it.  You must have internet connectivity for this to succeed.

...

• MT: Configuration
• Getting Started: Two Ignition Architecture

Additional Resources

...

• https://inductiveautomation.com/downloads/

...

• https://inductiveautomation.com/downloads/third-party-modules

...

• Check out the Cirrus Link Forum: https://forum.cirrus-link.com/
• Contact support: support@cirrus-link.com

...

• Email: sales@cirrus-link.com
• Phone: +1 (844) 924-7787

...